System requirements :

• Acetic Anhydride Pilot Plant shall be able to produce the Acetic anhydride. 
• The control panel shall be able to control all valves, mixer and read the data of the sensors (Temperature-pressure-Heater).

Physical requirements :

• The pipes shall be able to withstand the temperatures and pressures that exist at the points.

- Temperature that shall be withstood: 100+ degrees celsius.

- Pressure that shall be withstood: 2 bar.

• The tanks shall be able to withstand the Temperatures exchanges, pressures and mechanical forces that exist at the points.

- Temperature that shall be withstood: 100+ degrees celsius.

- Pressure that shall be withstood: 2 bar.

-mechanical force: mixer movements and rotation.

• The sensors (Temperature, Pressure and Flow) shall be able to withstand the temperatures and pressures that exist at the points.

- Temperature that shall be withstood: 100+ degrees celsius.

- Pressure that shall be withstood: 2 bar.

Chemical requirements :

- The Tanks system shall be able to insulate the chemical reagents. 

- The Tanks system shall be able to withstand the corrosion with organic reagents acetic anhydride, toluene, acetyl chloride and acetic acid.

- The pipe system used shall be able to withstand the corrosion with acetic anhydride, toluene, acetyl chloride and acetic acid.

- The valves shall be able to withstand the corrosion with acetic anhydride, toluene, acetyl chloride and acetic acid.

 - The sensors (Temperature, Pressure and flow) shall be able to withstand corrosion with acetic anhydride, toluene, acetyl chloride and acetic acid.

Mechanical requirements :

- The Tank system shall be made of Stainless Steel 316.

- The Tank system shall be able to close the system completely.

- The pipes shall be made of stainless steel 316.

- The pipes shall be able to resist the pressure without let gas or vapor exit through. 

- The valves shall be made of stainless steel 316.

- The valves shall be able to close completely.

- The valves shall be able to open or close with independent pressure.

- The sensors shall be made of stainless stell 316.

- The sensors shall be able to close the system completely.

- The sensors shall be able to read the data from the system.

- The Acetic Anhydride pilot plant shall be designed acccording to the mechanical design.