LINAC Test 16.01.23

00001: Ensure complete emptying of air

Step	Step description	Expected result	Result
precondition	system is off
Switch on the system	turn on the pump	95% vacuum	Negative
Having a leak	we found a leak in the anode, the cathode and the joint between the cathode and the pump hose	Seal the leakage places	positive
Switch Off the system	Turn Off the pump	the pump stops pulling out the air	positive
Silicon use	Put silicon in places where air leaks	Stop leakage and get 95% vacuum	positive
Postcondition	System is off

Analysis of the test results:

When we turned on the pump, we found that the vacuum had not been completed yet, and we knew where the air was leaking.

What we did:

So we sealed the leaks with silicone.